Maxilite

Save Power Use More Light A strong, stable and cost effective sheet, Maxilite is suitable for most industrial and commercial applications. Maxilite is a quality Melinex^®389 coated translucent sheeting guaranteed not to lose more than 30% of original light transmission after 10 years of use. Maxilite cuts out 99% of UV rays and diffuses natural light for more even distribution within the building. Maxilite is the cost effective option for commercial buildings, helping your budget stretch a little further without sacrificing quality of product or service. So for quality, service and superb value for money, choose Maxilite.

Maxilite Light Transmission Options

TINT OPTIONS	% VISIBLE LIGHT TRANSMISSION
Maxilite Clear	79
Maxilite Opalescent	66
Maxilite Woolstore	43
Maxilite Cool-Lite	31

Maxilite is also available in the following specifications:

Fire Retardant: Reduce smoke generation (subject to quantity and lead time restrictions)
Cool-Lite: Reduce heat transmission

Sheet lengths, profile types, tint options and other sheet thicknesses are also available.

Range of Profiles:

Corrugate, Windek, Trimdek, Styleline, V-Rib, Brownbuilt 900, LT7, Steelspan 900, Dimondek 400, Flat Sheet and many more

Maxilite Span Capacity Chart

PROFILE	GAUGE (mm)	SPAN (mm) Without Mid Span Support
Corrugate	1.1	1000
	1.4	1200
	1.7	1300
Trimdek/Styleline	1.1	1200
	1.4	1500
	1.7	1700
Windek	1.1	1200
	1.4	1400
	1.7	1600
V Rib	1.1	1200
	1.4	1500
	1.7	1700
LT7	1.1	1400
	1.4	1700
	1.7	1800
Brownbuilt 900	1.1	1400
	1.4	1700
	1.7	1900
Steelspan 900/Topspan	1.1	1600
	1.4	1800
	1.7	2000
Super Six	1.1	1400
	1.4	1600
	1.7	1800
Dimondek 400	0.75	1200
Dimondek 400	0.9	1400
Dimondek 630	1.4	900
Dimondek 630	1.7	900

Maximum Ultimate Wind Load is 1.5 kPa. Not intended to support point loads.
These spans apply where the natural lighting sheets are installed with at least 1 side edge supported by an adjacent metal roof.

TOP