Dimondek 300

Dimondek 300 is a smaller scale, concealed fixed companion to Dimondek 400 and is especially suitable for commercial applications where fine detail and design proportions are an integral component of the architect’s brief. Dimondek 300 can be used at a low pitch like all Dimondek profiles and the stiffened ribs provide structural strength and weather tightness as well as the ability to be secured in place without the need for penetration of the sheet by fixings.

Cover: 305mm Sheet Width: 310mm
Minimum Pitch 3° (approx 1:20)

ROOFING SPAN CAPACITY CHART

CLADDING SPAN CAPACITY CHART

Thickness

End Span

Internal Span

0.40mm	1.10m	1.60m
0.55mm	1.30m	2.00m

Thickness

End Span

Internal Span

0.40mm	1.90m	2.40m
0.55mm	2.40m	2.40m

* To suit ultimate wind loads up to 2 kPa

Note: Spans shown above are for steel. When using other materials please call 0800 Dimond for more info.

All roofing spans shown are maximum spans to suit occasional foot traffic only. Not suitable for use as a platform for maintenance work.

TOP