V-Rib

The clean-cut, striking appearance of V-Rib makes it a very popular roofing and cladding profile used on a wide range of applications from the Comalco Aluminium Smelter at Tiwai Point, Southland to the prestigious Mikano restaurant on Auckland’s waterfront. The symmetrical sections have inherent strength characteristics which provide a good tolerance to foot traffic as well as the title of the strongest drape curved roofing profile available. Where design criteria demands continuous length, economy and simple, speedy erection choose V-Rib.

Cover: 915mm Sheet Width: 966mm
Minimum Pitch 4°

ROOFING SPAN CAPACITY CHART

CLADDING SPAN CAPACITY CHART

Thickness

End Span

Internal Span

0.40mm	1.30m	1.80m
0.55mm	1.80m	2.50m

Thickness

End Span

Internal Span

0.40mm	2.00m	2.90m
0.55mm	2.70m	4.00m

* To suit ultimate wind loads up to 3 kPa

Note: Spans shown above are for steel. When using other materials please call 0800 Dimond for more info.

All roofing spans shown are maximum spans to suit occasional foot traffic only. Not suitable for use as a platform for maintenance work.

TOP